EN
158
Picture mode
Focusing by touching
In this mode, the AF frame can be moved for every picture, without
additional settings in the menu. The metering characteristics and
metering fi eld size correspond to single fi eld metering.
► Select
► Select Touch AF in the submenu
Moving the metering fi eld
Fig. 48a/b
► Press the monitor at the required position in the image fi eld
1/80002.8F 12500ISO EV
A
-3 2 1 0 21 3+
823412MP
INFO
1/80002.8F 12500ISO EV
A
-3 2 1 0 21 3+
823412MP
INFO
Fig. 48a Fig. 48b
• The AF frame 'jumps' to the selected position.
Pictures
In this case, the focusing process does not take place when the
shutter release is pressed to the pressure point but immediately
when you press the monitor.
Note:
The metering fi eld remains at the last point determined, even after
turning off the camera.
Multiple fi eld measurement
This metering method detects the subject using a total of 11 fi elds.
Focusing is carried out automatically based on the parts of the
subject detected at the shortest distance, thus providing maximum
reliability for snapshots. The fi elds used are indicated by AF frames.
Under normal circumstances, 9 of the 11 fi elds are used, and are
positioned in such a way as to cover most of the center of the
image.
► Select
► Select Multi Point in the submenu
Face detection
In this mode, the Leica T automatically detects faces in the image
and focuses on the one that is detected at the shortest distance. If
no faces are detected, multiple fi eld metering is used.
► Select
► Select Face Detection in the submenu
To Next Page
Loading...
Need help?
General
Weight and Dimensions
