Leigh R9 PLUS - Fine-Tuning Joint Fit with e-Bush

1818
ROUTER TABLE OPERATION R9PLUS Joinery System User Guide
The Leigh e-Bush
Chapter 5
5-5 Adjust the e-Bush with the pin wrench. Markings on the
e-Bush indicate which way to turn it for a looser or tighter fit.
5-6 After a good fit is established, record the e-Bush setting
for easy repeatability the next time.
■
5-6 One division of the e-Bush changes the joint glue line by
0.002" [0.050mm]. A perfect fit will be established with one or
two test cuts.