Leigh Super Series User Manual

iii
INTRODUCTION
SUPERJIG-12-18-24 User Guide
Introduction ............................................................................................................... ii
Chapter 1 – Jig Assembly, Mounting, and Using The Clamps .................................. 1
Chapter 2 – Adjusting the Finger Assembly ............................................................. 7
Chapter 3 – The Leigh e-Bush and Optional Guidebushes ....................................... 9
Chapter 4 – Basic Jig Functions and Scale Modes ................................................... 11
Chapter 5 – Using Your Jig Safely ............................................................................ 13
Chapter 6 – Wood Preparation ................................................................................ 15
Chapter 7 – Router Preparation ............................................................................... 17
Chapter 8 – Through Dovetail Procedures .............................................................. 19
Chapter 9 – Variably Spaced Half-Blind Dovetail Procedures ................................ 29
Chapter 10 – Single Pass Half-Blind Dovetails ........................................................ 37
Chapter 11 – Rabbeted Half-Blind Dovetails .......................................................... 45
Chapter 12 – Asymmetric Dovetails ....................................................................... 47
Chapter 13 – Sliding Dovetails ................................................................................. 51
Chapter 14 – Box Joints ............................................................................................ 57
Chapter 15 – Hints and Tips ..................................................................................... 63
Appendix I – Attaching the Leigh e-Bush to the Router ........................................ 67
Appendix II – Bit Selection ....................................................................................... 69
Appendix III – Jig Parts ............................................................................................. 75
Appendix IV – Customer Support ............................................................................ 79
TECHNICAL BULLETINS
Downloadable pdfs are available in the Support menu at
leightools.com/technical-bulletins:
• Inlaid Through Dovetails on the D1600 and Super Jigs
• Wider Pins on the D1600 Jig and Super Jigs
• End-on-End Dovetails on the D1600 and Super Jigs

Leigh Super Series Specifications

General

Category	Power Tool
Type	Dovetail Jig
Material	Aluminum
Dovetail Type	Through and Half-blind
Features	Adjustable for different wood thicknesses