Need help?Do you have a question about the Leisure bay spas P1Series and is the answer not in the manual?
General| Brand | Leisure bay spas |
|---|---|
| Model | P1Series |
| Category | Hot Tub |
| Language | English |
Essential electrical safety rules, including GFCI, grounding, and shock prevention measures.
Warnings related to water temperature, substance use, and medical conditions for safe spa enjoyment.
Guidelines for proper placement and visibility of the spa warning sign.
Rules for safe spa operation: supervision, water cleanliness, and temperature control.
Dangers of hot water immersion, prolonged use, and interaction with alcohol or drugs.
Critical instruction to replace damaged drain covers to prevent entrapment hazards.
Criteria for a stable, level site with adequate load-bearing capacity for spa installation.
Instructions for filling the spa, managing water levels, and initial chemical treatment.
Guidance on the frequency and procedure for draining the spa to maintain water quality.
Procedures and warnings for winterizing to prevent freeze damage to the spa and equipment.
Essential GFCI protection and disconnect switch requirements for P1 series spa electrical connections.
Specifies NEMA 5-20R receptacle and isolated, dedicated circuits for 120V P1 installations.
Cautionary note that spa cabinet panels require removal by qualified service professionals only.
Steps and electrical code requirements for converting the P1 series from 120V to 240V hardwired.
NEC requirements for GFCI and disconnect switches for 240V P1 circuits.
Specifies isolated, dedicated 240V circuits (30 or 50 Amp) for P1 series operation.
Steps and electrical code requirements for installing the P2 series 240V hardwired system.
NEC requirements for GFCI and disconnect switches for 240V P2 circuits.
Specifies isolated, dedicated 240V circuits (30 or 50 Amp) for P2 series operation.
Visual guide illustrating the necessary wiring connections for a 240V spa installation.
Detailed steps for P1 series 120V to 240V conversion, including terminal torque specifications.
Explanation of the function of each dip switch on the P1 series control board.
Description of the dip switch settings and their corresponding functions for the P2 series.
Overview of P1 control console buttons: start-up, temperature, jets, lights, freeze, standby modes.
How to program filtration cycles and ozone purification on the P1 console.
Overview of P2 control console buttons: start-up, temperature, jets, lights, freeze, standby modes.
How to program filtration cycles and ozone purification on the P2 console.
Explanation of heating modes: Standard, Economy, and Sleep for temperature control.
How the spa manages high ambient temperatures affecting water temperature settings.
Comprehensive guide to spa display messages, their meanings, and necessary actions.
Step-by-step instructions for cleaning the spa's skim filter cartridge effectively.
Guidance on establishing a routine for maintaining spa water quality based on usage patterns.
A chart detailing recommended maintenance tasks for different spa usage levels.
Explanation of pH levels, alkalinity, and their importance for maintaining spa water balance.
Information on calcium hardness effects and recommended levels for optimal spa water chemistry.
Instructions for cleaning the spa shell, tub ring, and cabinet surfaces.
To Next Page
