Need help?Do you have a question about the LELY WELGER RP 302 SPECIAL and is the answer not in the manual?
General| Type | Round Baler |
|---|---|
| Bale Width | 1.2 m |
| Pickup Width | 1.8 m |
| Bale Chamber Type | Fixed chamber |
| Bale Density | Adjustable |
| Power Requirement | 55 kW (75 hp) |
Guidelines and precautions to prevent fire hazards related to the baler and its operation.
Explanation and importance of various warning symbols used on the baler for safety.
Detailed descriptions for each warning symbol, including their meaning and purpose.
Essential checks and procedures before driving the baler on public roads.
Procedures for correctly attaching the baler to the tractor for safe and efficient operation.
Information on the universal drive shaft, including connection, removal, and adjustment procedures.
Guidance on adjusting the universal drive shaft length for optimal overlap and safe operation.
Step-by-step guide on how to thread new twine spools into the baler for operation.
Detailed procedure for safely loading and securing a new net roll into the baler.
Instructions for activating, deactivating, and operating the baler's cutting device.
Procedures for installing, removing, and safely handling the baler's cutter blades.
Steps for preparing and securing the pick-up unit and bale ejector for road transport.
Operation of the pick-up unit for raising and lowering using tractor controls.
How to set the desired bale density using the lever or the control panel.
Procedures for properly locking the tailgate after bale ejection for safe operation.
Overview of the BALERCONTROL E control panel components and their functions.
How to manually or automatically trigger twine and net wrapping using the control panel.
Steps for manually triggering twine wrapping, including density achievement and motor activation.
Steps for manually triggering net wrapping, including density achievement and cutting knife operation.
Process for automatic twine wrapping, including density achievement and buzzer signals.
Process for automatic net wrapping, including density achievement and buzzer signals.
Overview of the BALERCONTROL III control panel functions and displays for wrapping operations.
How to select and sequence different bale wrapping types using the AUTO/MAN button.
Detailed steps for manually triggering twine wrapping and subsequent bale ejection.
Detailed steps for manually triggering net wrapping and subsequent bale ejection.
Procedures for hydraulically ejecting the finished bale and locking the tailgate.
Safety precautions for operating the Balercontrol system to prevent damage or injury.
To Next Page
