5.4008.8520.0 -
6-4 Operating Instructions
Figure 16. Switch the machine ON and OFF
KEY: 1. PAUSE button - 2. Safety 24V overload LED (red) - 3. CAN LED (green) - 4. CPU2 LED (green) - 5. CPU1 LED (green) - 6. ON/
OFF button
6.3 Put the Machine Into Operation and take it Out of Operation
Moving machine.
Risk of injury. When the machine is in operation mode, be aware that the machine is
operated autonomously and can move unexpectedly. Keep persons away from the machine!
Before you start operating the machine, make sure that you know the location of the
PAUSE button.
The machine has two working modes: In operation and out of operation:
• In operation:
When the machine is in operation, the programmed day planning is controlling the machine.
It is not possible to control the machine manually.
in n o vato rs in ag ric u ltu re
To Next Page
Loading...
