5.4008.8520.0 -
Operating Instructions 6-5
• Out of operation:
The day planning can not control the machine. You can manually control the machine with the Lely
Control Plus app.
When the out-of operation mode is switched on, the machine stops immediately when it is moving.
Therefore, the out of operation mode can be used in emergency cases.
There are two ways to put the machine into operation and take it out of operation:
• With the PAUSE button on the machine.
• With the Lely Control Plus application.
6.3.1 Put the Machine Into Operation and take it Out of Operation with the PAUSE
Button
The first time after switching on the machine (see Switch the Machine ON and OFF on
page 6-2), you can only put the machine into operation by means of the Lely Control Plus
application (see Put the Machine Into Operation and Take it Out of Operation with the
Lely Control Plus Application on page 6-6).
The PAUSE button is at the front of the machine . The position of the PAUSE button is
marked with a decal. Make sure that you know the position of the PAUSE button!
Put the Machine Into Operation with the PAUSE Button
1. Push the PAUSE button (2).
• The PAUSE button lights switches OFF.
• The operational sound of the machine is switched ON.
• The machine is controlled by the day planning.
Take the Machine Out of Operation with the PAUSE Button
1. Push the PAUSE button (2).
• The PAUSE button light switches ON.
• The operational sound of the machine is switched OFF.
• When the machine is moving, it stops immediately. It also stops taking in manure and sprinkling
water.
• The machine can be controlled manually now (see on page 6-8).
in n o vato rs in ag ric u ltu re
To Next Page
Loading...
