5.4008.8520.0 -
Operating Instructions 6-13
7. When the machine is empty and all manure is pushed through the slatted floor, tap
.
6.4.4 View and Acknowledge Alarms
If there is an active and critical alarm on the machine the following will happen:
• The acoustic warning device on the machine will generate a beeping sound (5 beeps every 2 seconds).
• On the machine, the PAUSE button light blinks.
• When the Lely Control Plus application is connected to the machine on the smartphone the alarm list
will pop up.
Acknowledge the Alarm
1. Select the alarm you want to acknowledge. The following screen appears:
2. Follow the instructions mentioned under Recovery procedure, when the procedure is written in this
manual, otherwise contact your Lely technician.
• Additional information to the alarm can be viewed by tapping
Failure info.
3. If the alarm is not blocking anymore, tap
Mark as solved.
• The alarm list appears again. The acknowledged alarm shifts from the group of New alarms to
History.
6.4.5 Modify the Day Planning
The day planning determines:
• The routes that the machine will drive.
• When the machine will start driving these routes.
• If the routes are driven with or without spraying water.
in n o vato rs in ag ric u ltu re
To Next Page
Loading...
