5.4008.8520.0 -
7-2 Maintenance
7.2 Hoist the Machine
Falling object.
Risk of being crushed.
Use suitable and well maintained hoisting equipment (telehandler or fork-lift truck and
a rope or sling) that can carry more than 400 kg (882 lb). Never stand under the lifted
machine.
Do not use steel hoisting tools on the hoisting eye. Use stainless steel tools or sling.
1. Remove the filter (see Clean the Top Air Filter on page 7-3).
2. Remove the plate (1) (see figure 18 on page 7-2).
3. Connect the hoisting tool too the hoisting point (1) (see figure 19 on page 7-3).
4. Hoist the machine.
Figure 18. Remove or install the plate
KEY: 1. Plate - 2. Plate
in n o vato rs in ag ric u ltu re
To Next Page
Loading...
