1 Connect2.4GHzReceiver
Connect the 2.4GHz receiver to
the device USB port.
Switch togge to 2.4GHz mode
G cable
G = 2.4GHz
2 ConnectBluetooth
Switch togg e to Bluetooth
G/ cable/ BT
Type-c
ExtensionAdapter
Cable
For Receiver
2_4GHz
Receiver
Note: Forthe best wireless experience,we recommend using the
extension adapter for receiver and putt'ng the 2.4GHz receiver
somewhere on your desk close to your keyboard for a low rate
of latency and fewer signal interferences.
Press Fn + 1 (for 4 seconds) and pairwith
device named Lemokey L3.
5
To Next Page
Loading...