EasyManua.ls Logo

LENCO DAC-100 - Page 17

LENCO DAC-100
111 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
How to use:
1. Insert the power supply plug into the car cigarette power port (Input:
DC12V).
2. Short press turn on, Short press turn off.
3. Connect the AUX wire (included) from the out jack of the DAB-100 with
the AUX input jack of your car or car radio.
4. DAB mode:
---A: Under DAB mode, long press enter into DAB full scan, and
then rotate the M button to adjust the DAB station.
Since 2 times FM frequency is close DAB station frequency, in order to
avoid interfering DAB station scanning, the FM transmitter will stop work
when you scanning DAB station. After scanning the DAB station, the FM
transmitter will automatically change to the frequency that is not
interfering with the DAB signal frequency.
---B: Under your favorite station, long press choose favorite
station, then rotate the button to choose the location you want to save
(such as p1, p2), then short press M button to confirm.
PRESET mode:
1. Short press , and then rotate the M button to listen the favorite
station which you saved.
2. Turn on your in-car audio system.
Volume control:

Related product manuals