LENCO DIR-2000 - Music Sharing; PC Music Sharing via UPnP

11
Once you have successfully set up the network, the device will automatically
connect to the network the next time when you turn the device on again. In
case you would like to change the network, enter System
System
System
System Setting
Setting
Setting
Setting to configure
the corresponding connection. You may refer to Section 5.2.1 and 5.2.3 for
details.
Press the STANDBY/MODE
STANDBY/MODE
STANDBY/MODE
STANDBY/MODE on the device or on the remote control to
enter the operation mode , and press again to enter the standby mode.
Time, date and any active alarm times will be displayed on the screen.
Press / on the remote control or rotate the volume control on
the device to adjust the volume. If you wish to switch the sound off,
press , press again to resume audio listening.
Music
Music
Music
Music Sharing
Sharing
Sharing
Sharing from
from
from
from PC
PC
PC
PC
• To share music files from your PC, follow the steps below:
- Connect the PC to the network.
- Ensure the device is powered on and connected to the same
network .
- Open the UPnP platform Windows
Windows
Windows
Windows Media
Media
Media
Media Player
Player
Player
Player (version 1 1 or
later). Alternatively, other platforms or server such as Windows
Windows
Windows
Windows
Media
Media
Media
Media Connection
Connection
Connection
Connection may be used .
The following is an example of setting up with the Windows XP and Windows
Media Player 11.