8
INITIAL SETUP
Before operation, please make sure that the voltage mentioned on the power supply is the same as
the voltage of your local area.
Use the supplied mains adaptor to connect the device to your household mains socket.
Switch the ‘OFF/ON’ (16) button to ‘ON’ on the back to power up.
The system will ask you to set the units Language.
Use the Navigation (8) wheel to select the desired language, then press the Navigation (8) wheel to
confirm.
Do you want to check the WIFI network availability when powering on the device? Use the
Navigation (8) wheelto select the desired option and press the Navigation (8) wheel to confirm.
Now you can configure the wireless network.
To Next Page
Loading...
