1 Press the DVB
DVB
button on the remote control to select
DVB-T mode
2 Select “Yes when asked to use the “installation wizzard”,
” (use the left/right buttons to navigate and press
ENTER
enter
to confirm)
3 Select your “country” and “menu language” ” (use the
left/right /up/down buttons to navigate and press
ENTER
enter
to confirm)
4 Select “yes” to start ‘auto-scan”
1 Press the TV
TV
button on the remote control to select
ATV mode
2 Press the SETUP
setup
button on the remote control to
enter “ATV setup”
3 Use the up/down buttons on the remote control to select
“TV FORMAT” , press ENTER
enter
to confirm
4 Use the up/down buttons to select your TV format (most
european countries use PAL BG) , press ENTER
enter
to
confirm
5 Press the return button on the remote to return
6 Use the up/down buttons on the remote control to select
“AUTO SEARCH” , press ENTER
enter
to confirm,
autoscan will start.
7 Once the channels are stored, select the channels with
the CH+/CH- buttons
1 Open the TFT cover
2 Insert a DVD/CD (label facing up)
3 Wait unil the unit reads the disc, it will show DVD, VCD
or CD in the TFT display
4 The disc will be played automatically
Please refer to the manual for a more detailed explanation
about the button functions.
Preparation / installation:
Connect the power (see first image below)
Connect the available antenna types (ATV/FM, DVB-T) to
the correct antenna input of the unit (see second image
below)
Insert the batteries into the remote control.
When using the unit without adapter please insert
rechargeable batteries into the battery compartment.
We recomment to use rechargeable batteries only.
Please remove the batteries when the unit is not used for
a longer period of time, the batteries will last longer.
QUICK-GUIDE DTVR-700
Connect to 230 V.
AC wall outlet
Need help?
General
