LENCO DVP-1010 User Manual

1.VOL-/VOL+ Button
2. MENU
3.
4.
LEFT / Fast Backward
UP/ Prev
Down/ Next
Right / Fast Forward
OK: Confirms selections on the menu screen
5. SETUP
6. SOURCE
7. Open button
8.
Battery Charging Indicator
Illuminates green flashing when the battery is charging.
Illuminates green when the battery is fully charged.
9. Remote sensor
10.
Power Indicator
Illuminates red when the unit is switched on.
11. SD/MMC card slot
12. USB
13. Earphone socket
14. AV OUT
15. ON/OFF
16. DC IN 9-12V

LENCO DVP-1010 Specifications

General

3D	-
Quantity	1
Device type	DVD player
Product color	Black
Battery capacity	1200 mAh
USB connectivity	Yes
Connectivity technology	Wired
Number of products included	1 pc(s)
Aspect ratio	16:9
Display diagonal	10 \
Display resolution	1024 x 600 pixels
Built-in HDD	No
Disc types supported	CD, DVD
Compatible memory cards	MMC, SD
Number of optical discs	1 discs
Speaker power	1 W
Battery voltage	7.4 V
Battery recharge time	4 h
Number of built-in speakers	2
Analog signal format system	NTSC, PAL
Audio decoders	Not supported
Frequency response DVD	20 - 20000 Hz
Audio dynamic range DVD	85 dB
Signal-to-Noise Ratio (SNR)	80 dB
Audio formats supported	MP3
Image formats supported	JPEG
Video formats supported	MPEG1, MPEG2, MPEG4
HDMI ports quantity	0
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	100 - 240 V
AC input frequency	50 / 60 Hz
Package weight	1580 g
Storage temperature (T-T)	-20 - 45 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	5 - 90 %
Form factor	Convertible
Product type	Portable DVD player

Weight and Dimensions

Depth	42 mm
Width	246 mm
Height	203 mm
Weight	830 g