9
Mounting in the Vehicle
Use the supplied car mounting straps to install the DVD player on the back of the vehicle's headrests.
Tightly wrap the mounting strap around the headrest.
1. Slide the ends of the straps through the pin slots in the back of the DVD player.
2. Swivel the display 180° clockwise and then fold it down with the display facing out.
3. Whilst one person holds the DVD player in place, pass the straps around the headrest. Secure the
player by passing the ends of the straps through the clips and tightening them.
Important: Always ensure the straps are tight before commencing any journey
To Next Page
Loading...
