Preparation / Installation:
Connect the antenna to the antenna input on
the device.
Connect the 12V. DC input to the device and
the AC ADAPTER to a plug.
Place the batteries in the remote control.
Press the "Power" button. The device is now
ready for use.
The TV application will be explained below step by step.
TV Terminal connection
Setup / Default TV operation:
1 Select "TV" using the "Source" button.
2 Press "TV setup menu" repeatedly until "TV menu"
appears.
3 Go to the TV submenu.
4 Press "Channels".
5 Press "Channel scan".
6 The TV will automatically start searching for channels.
As soon as this process is finished (this can take a couple of
minutes), the stations will be set automatically.
Select the stations with the "program +/-" button
Basic operation DVD/CD:
1 Select DVD with the “Source” button
2 Insert a DVD/CD (label facing away from you) into the
slot at the left side of the unit
The unit will pull in the disc by itself! So don’t push
3 Wait unil the unit shows you the disc menu or until it
starts to play the content automatically
4 Use the buttons on the remote or the buttons on the
left side of the unit to playback a DVD/CD
Please refer to the manual for a more detailed
explanation about the button functions.
QUICK-GUIDE DVT-1932
Need help?
General
