EasyManua.ls Logo

LENCO EPB-410 - Page 9

LENCO EPB-410
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
The power light is not ON.
Please check that the earphone is charged.
The earphone cannot connect with
each other.
After factory reset quickpress 2x the right earbud.
The earphone cannot connect with an
Bluetooth device.
Long press to power off, press 1.5 seconds to
restart the earphone.
After duo use is not possible to listen
to 1 earphone.
Make sure the other earphone is shut down.
There is no sound from the earphone.
Please adjust the volume of your phone.
TECHNICAL SPECIFICATIONS
Charging voltage5V
Battery capacity 45mAh
Charging time earphone: Less than 1 hour
Charging time charging base: Less than 1 hour
Playing timeUp to 150 mins
Charging station
1. Dual USB Port
2. Input: 5V~1A
3. Output: 5V~1A
4. Charging case battery capacity: 400mAh
GUARANTEE
Lenco offers service and warranty in accordance to European law, which means that in case of
repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way,
the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty
obligations of the manufacturer will be voided.
DISCLAIMER
Updates to Firmware and/or hardware components are made regularly. Therefore some of the

Related product manuals