LENCO HOG080 - Page 14

13
HDMI Source
1: Ensure that the soundbar is connected to the TV or
other audio device via HDMI cables.
2: Press the HDMI button on the remote.
3: The indicator light will lit in white.
Note: The device can synchronize the volume with the
TV, and also with the switch.
Trouble shooting
Troubles
Solutions
Pairing
connection via
Bluetooth
cannot be
completed
Other mobile device has connected before
use and the mobile device has not left as
well as its Bluetooth is not off. When it
connects, Bluetooth of this device will
automatically find the Bluetooth device
and connect. First, turn off Bluetooth of the
connected Bluetooth devices, then the next
Bluetooth device can be found and
normally paired to connect.
Volume of
playback via
Bluetooth is
small
After connections with mobile devices,
volume of Bluetooth device is not up but at
the default output level. Turn on the
mobile device output.
Output volume of Bluetooth device is low
itself.
Connection
distance via
Bluetooth is
short
Obstruction exists between mobile devices
and Bluetooth device. Remove
obstructions.
Connection via
Bluetooth
right,
sometimes
Obstruction exists between mobile devices
and Bluetooth device. Remove
obstructions.
Too far away from Bluetooth device to
connected mobile devices, beyond the
connection range.