LENCO LS-10 User Manual

9
Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during
and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the
manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction,
specifications and pictures in this documentation may differ slightly from your particular situation. All items
described in this guide for illustration purposes only and may not apply to particular situation. No legal right or
entitlements may be obtained from the description made in this manual.
Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as
general household waste in Europe. To ensure the correct waste treatment of the product and
battery, please dispose them in accordance to any applicable local laws of requirement for disposal
of electrical equipment or batteries. In so doing, you will help to conserve natural resources and
improve standards of environmental protection in treatment and disposal of electrical waste
(Waste Electrical and Electronic Equipment Directive).
CE Marking
Products with the CE marking comply with the EMC Directive (2014/30/EU) and the Low Voltage
Directive (2014/35/EU) issued by the Commission of the European Community.
Hereby, Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this
product is in compliance with the essential requirements.
The declaration of conformity may be consulted at techdoc@lenco.com
Service
For more information and helpdesk support, please visit www.lenco.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.

LENCO LS-10 Specifications

General

Type	Belt-drive audio turntable
Operation	Semi Automatic
Motor type	DC motor
Output level	380 mV
On/off switch	Yes
Product color	Black
Wow & flutter	0.35 %
Cartridge type	Ceramic stereo cartridge
Housing material	MDF
Turntable speeds	33, 45 RPM
Signal-to-Noise Ratio (SNR)	40 dB
Power supply type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1 A
AC adapter output voltage	5 V
Power consumption (standby)	0.5 W
Package depth	393 mm
Package width	420 mm
Package height	181 mm
Package weight	2550 g
Quantity per master (outer) case	2 pc(s)
Quantity per intermodal container (20ft)	740 pc(s)
Quantity per intermodal container (40ft, HC)	1530 pc(s)
Number of built-in speakers	2
Quantity	1
USB ports quantity	0
Headphone connectivity	3.5 mm
Tracking force range	4 - 6 g

Weight and Dimensions

Depth	315 mm
Width	327 mm
Height	102 mm
Weight	2160 g
Platter diameter	200 mm