EasyManuals Logo

LENCO LS-430 User Manual

LENCO LS-430
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
20
adapter and then wipe off the dirt and dust with a soft, dry cloth.
Do not use benzenes, thinners, etc.
When storing the product for a long time, disconnect the AC
adapter from the outlet and wrap the product in plastic; do not
allow it to become damp; the drive belt should be removed to
prevent unequal stretching.
Stylus Tip
If dirt and grime are stuck to the stylus tip,
clean it with a commercially sold brush.
We recommend using a stylus cleaner
(not included) if the stylus tip is considerably
dirty. Clean the stylus tip by moving the
brush from the rear to the front of the stylus
tip.
Replacing the Stylus
It's suggested to replace the stylus after 400 hours of use.
Removing the Stylus
In addition to the deterioration of sound quality, records may also
be damaged as the cartridge's stylus tip wears down.
Be sure to disconnect the product's AC adapter from the outlet.
When replacing the stylus, hold the headshell and the cartridge
body tightly. Rotate the front of the stylus in a forward and down
motion.
Installing a New Replacement Stylus
1. Mount the new replacement stylus to the cartridge.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LENCO LS-430 and is the answer not in the manual?

LENCO LS-430 Specifications

General IconGeneral
BrandLENCO
ModelLS-430
CategoryTurntable
LanguageEnglish

Related product manuals