24
6. Place the belt on the brass-colored motor pulley
Grasp the belt that was attached in step 4 and, while pulling it, place it
on the brass motor pulley.
7. Using your hands, slowly rotate the platter ten times in a
clockwise direction as shown by the arrow below.
When the Turntable is Moved
Using the product's original packing materials, wrap the turntable in
the reverse order from when you unwrapped it. If you do not have the
packaging materials, take the following measures:
• After disconnecting the AC adapter from the outlet, remove the felt
mat and platter, and then wrap them so that they do not get
damaged.
• Attach the protector to the cartridge.
• Use a string or something similar to tie the tonearm to the rest so
that it does not become dislodged.
• Wrap the turntable body with paper or a soft cloth so that it does
not get damaged.
To Next Page
Loading...
Need help?
General
