LENCO LS-50 User Manual

8
5. AUDACITY QUICK GUIDE (PC editing program)
Before Starting the Software
Make sure that your USB turntable is plugged into the computer and both the computer and the
turntable are plugged in and on.
To Install Software (PC)
1. Plug in your turntable to an AC outlet and connect the USB port on the Turntable to the USB
port of your computer.
2. Turn on the power switch to your turntable.
3. The Windows system will detect a new device and indicate that it is available to use.
4. Insert the CD that came with your USB turntable.
5. Run the file to install the Audacity software. Once installed, run the Audacity program.
To Install Software (MAC)
For MAC, please go to
http://www.audacityteam.org and download the latest version of the MAC
software.
Software Configuration
1. Click on Microphone in the drop down menu and select “Stereo Mix”
Figure 1: Select Stereo Mix
2. Select the “Edit” menu and then “Preferences”
Select the USB audio device under the “Recording” selection as shown. Select “Software Playthrough”
to hear the audio while recording.
Note: The USB Turntable may show up with a different name in the Windows system. This may depend
on your computer model and operating system. 99% of the time it will contain “USB” in the Name.

LENCO LS-50 Specifications

General

Type	Belt-drive audio turntable
Hi-Fi	No
Product color	Gray
Cartridge type	Ceramic stereo cartridge
Nominal speeds	33 1/3, 45, 78 RPM
Housing material	MDF
Built-in amplifier	Yes
USB version	2.0
USB ports quantity	1
Number of speakers	2

Weight and Dimensions

Platter diameter	300 mm