EasyManua.ls Logo

LENCO PMX-300 - Page 12

LENCO PMX-300
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
OPERATING
SPECIFICATION
Frequency Response 20Hz-20KHz
Power Source 230V ~ 50Hz/12VDC
Max.Power
Consumpon
120W
Baery Lead/Acid 12VDC, 4.5 Ah
DC Playback me ~10hrs on 50% volume
Output power 250W (RMS)
Microphone Wireless 864 MHz
Bluetooth V4.2
FM radio 87.5-108 MHz
Unit Size (W x D x H) 32 x 33.7 x 98 cm
Tweeter size 2 x 1 inch
Woofer size 1 x 3 inch
Subwoofer size 2 x 10 inch
Unit weight 21 kg
Working Temperature 10-40 °C
The specicaon presents only as a reference. The value of weight and size are approximaon.
Our product is improved ceaselessly and the specicaon and funcon may be changed without prior
noce.
This product operates at 2400 - 2483.5 MHz and is designated only to be used inside a normal household
environment. This product is suited for this purpose within all EU counes.
Please note (For use of wireless microphone)
This product ope
rates at a frequency of 864 MHz and is designated only to be used inside a normal
household environment. This product is suited for this purpose within most
EU countries.
The user should check the allowed frequencies of the country where the unit will be used in.
(More informaon can be found at: hps://www.apwpt.org
)
The user is responsible for the use of this unit. Lenco cannot be held responsible if this unit is used for
other purposes than which are described in this manual.
Guarantee
Lenco oers service and warranty in accordance to European law, which means that in case of repairs
(both during and aer the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Le
nco directly.
Important note: If this unit is opened or accessed by an unocial service center in any way, the warranty
expires.
This device is not suitable for professional use. In case of professional use, all warranty obligaons of the
manufacturer will be void.