one USB disk. The multiply driver is selected by device default; however, you can change it when
necessary.
To change type of disk, choose “Online mode” choose “Multiply driver / Normal only (single
ordinary disk) / Card only” by using M and / ( / ) buttons.
f. To View “Memory info”
You can view about the memory status of player, such as the numbers of remaining memory
space available and the percentage of memory have used.
To view the status, choose “Memory info” by using M and / ( / ) buttons. An
information screen, remaining memory space available and percentage of memory used,
appear for view.
To return to setup menu or main menu press Center ( ) button or press and hold M button
g. To “Format Device”
You might need to format device the device memory. In some circumstances, the device
memory may be corrupted, or you may need to format the memory card if it newly use with this
device. However, you can format the device or memory card by the following method but all data
will be losses.
Choose “Format Device” then choose “Format Disk / Format Card” by using M and /
( / ) buttons, and then choose OK to process or choose Cancel to exit and back to
setup menu.
h. To View “Firmware Version”
You might need to view the details about firmware information inside the Player.
Choose “Firmware version” by using M and / ( / ) buttons, an information
screen appear for view.
To return to setup menu or main menu, press Center ( )
button or press and hold M button.
i. To “Firmware Upgrade” (System Utility Tools required)
You might need to upgrade the firmware for advanced the player performance or firmware
getting trouble or damaged in some circumstance, such as electrostatic voltage discharge issue
happens. Please follow the instruction posted by the dealer (if any) or follow the instruction from
System Utility Tools if provided. It is not recommended to do if the player is proper working.
j. To “Exit”
Select Exit to back to main menu. Or, press and hold the M button to go back main menu.
5. Use Music Menu
You can use music player to playback with supported music file format of audio coding; WAV
To Next Page
Loading...
