Lennox e-Lite LV-CW02 User Manual

C7
Table 5.1
27
Parameter
Code
Parameter
Content
Select
Parameters
Address
Setting
F0: Main wired
controller
F0
If two wired controllers control one indoor unit,
the address must be different
F1: Secondary
wired controller
Cooling
Only/Cooling
and Heating
Setting
00: Cooling and
Heating
00
Heating mode is not available in cooling only
setting.
01: Cooling
Only
Reserved
/
/
/
Set time to
remind users
to clean the
filter
00/01/02/03/04 02
00: No reminder to clean filter
01: 1250h
02: 2500h
03: 5000h
04: 10000h
Settings for
infrared
receiver of
wired
controller
00: Disable
01
When "Disable" is selected, the wired controller
cannot receive remote control signal,
01: Enable
Fan speed
setting in
wired
controller
00: 3 fan
speeds
02
Default is 7 fan speeds.
01: 4 fan
speeds
02: 7 fan
speeds
Reserved
/
/
/
Display
indoor
room
temperature
00: No
00
If "00" is selected, the wired controller will
01: Yes
Default
Value
Remarks
C0
C1
C2
C3
C4
C5
C6
C7
The bi-directional communication automatically
identifies 3 fan speeds or 7 fan speeds.
display the setting temperature when the
backlight is off. If "01" is selected, the wired
controller will display the room temperature
when the backlight is off.
1

Lennox e-Lite LV-CW02 Specifications

General

Brand	Lennox
Model	e-Lite LV-CW02
Category	Controller
Language	English