B613
•28•
Reference:Picture prompts may differ from different
operating system , the above is for reference only
4 Battery and Battery charge
The built-in lithium battery can be charged by being
connected to a computer through a equipped USB cable.
When battery is being charged, the battery indicator will
blink;and the battery is full, the full charge icon will
appear（ ）.It will take about 4 hours to full fill the
built-in lithium battery.Note: If the adapter is used,
please select a charger with the maximum output of 5 V 1
A .
５Fault diagnosis
Why won’t the recorder activate after pressing on power
button?
Reason and solution:
Lithium battery is out of power ,please charge it in
time.If the recorder crashes, press RESET to restart the
system and if still does not work, check whether the
To Next Page
Loading...