Lenovo ideacentre AIO Y910 - User Manual

ideacentre
AIO Y910
Quick Start Guide
Accessing other manuals
Carrying the computer
The Important Product Information Guide has been preloaded onto your
computer. To access this guide, do the following:
For models come with Lenovo Companion:
1. Open the Start menu and then click or tap Lenovo Companion.
2. Click or tap Support
→
User Guide.
For models without Lenovo Companion:
Open the Start menu and then click or tap Manual to access this guide.
For models without preinstalled operating systems:
Go to the Lenovo Support Web site to access your manuals. See “Downloading
manuals” for additional information.
Downloading manuals
The latest electronic publications for your computer are available from the
Lenovo Support Web site. To download the publications,
go to: www.lenovo.com/UserManuals.
Replacing or upgrading hardware
Safety information for replacing CRUs
Do not open your computer or attempt any repairs before reading the “Important
safety information” in the Safety, Warranty, Environment, Recycling Information
Guide and Important Product Information Guide that was included with your
computer.
If you no longer have this copy of the Safety, Warranty, Environment, Recycling
Information Guide and Important Product Information Guide, you can obtain
one online from the website at http://www.lenovo.com/UserManuals.
Pre-disassembly instructions
Before proceeding with the disassembly procedure, make sure that you do the
following:
1. Turn off the power to the system and all peripherals.
2. Unplug all power and signal cables from the computer.
3. Place the system on a flat, stable surface.
CRUs for your computer include:
• keyboard • adapter
• mouse • hard disk drive
• optical drive • memory module
• solid state drive*
This part contains instructions for replacing the following parts:
• Hard disk drive (Follow steps:
1
3
)
• Solid state drive (Follow steps:
1
4
)
• Optical drive (Follow steps:
1
3
5
)
• Memory module (Follow steps:
2
6
)
ATTENTION: Turn off the computer and wait 5 minutes to let it cool down
before removing any part of the computer.
ATTENTION: The parts marked with
can get hot during operation.
Do not touch!
Replacing or upgrading hardware Replacing or upgrading hardware Replacing or upgrading hardware Replacing or upgrading hardware
1
Removing the left rear cover
3
Removing the hard disk drive
5
Removing the optical drive
7
Removing the graphic card
2
Removing the right rear cover
4
Removing the solid state drive
6
Removing the memory module
The following information refers to ideacentre AIO Y910 machine type:
F0CJ [AIO Y910-27ISH/Energy Star]
Lenovo, the Lenovo logo and ideacentre are trademarks of Lenovo in the United
States, other countries, or both.
Windows is a trademark of the Microsoft group of companies.
Other company, product, or service names may be trademarks or service marks of
others.
© Copyright Lenovo 2016. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or
software is delivered pursuant to a General Services Administration “GSA” contract,
use, reproduction, or disclosure is subject to restrictions set forth in Contract
No. GS-35F-05925.
Version 1.0 2016.07
SP40L06497
The graphic card is optional CRU for experienced users. Instructions for
replacing this part can be found in the Hardware Maintenance Manual from
the Lenovo Support Web Site. To obtain a copy of the Hardware Maintenance
Manual, go to: www.lenovo.com/UserManuals.
To remove the graphic card: follow steps “
2
,
7
”.

Lenovo ideacentre AIO Y910 Specifications