10
Chapter 3 Hardw are Installation
Considerations Prior to Installation
Preparing Your Computer:
The motherboard contains numerous delicate electronic circuits and components which can become damaged as a
result of electrostatic discharge (ESD). Thus, prior to installation, please follow the instructions below:
1. Please turn off the computer and unplug its power cord.
2. When handling the motherboard, avoid touching any metalleads or connectors.
3. It is best to wear an electrostatic discharge (ESD) cuff when handling electronic components(CPU, RAM).
4. Prior to installing the electronic components, please have these items on top of an antistatic pad or within a
electrostatic shielding container.
5. Please verify that you the power supply is switched off before unplugging the power supply connector from the
motherboard.
Installation Notices:
1. Prior to installation, p
lease do not remove the stickers on the motherboard. These stickers are required for
warrantyvalidation.
2. Prior to the installation of the motherboard or any hardware, please first carefully read the information in the
provided manual.
3. Before using the product, please verify that all cables and power connectors are connected.
4. To prevent damage to the motherboard, please do not allow screws to come in contact with the motherboard
circuit or its components.
5. Please make sure there are no leftover screws or metal components placed on the motherboard or within the
computer casing.
6. Please do not place the computer system on an uneven surface
7. Turning on the computer power during the installation process can lead to damage to systemcomponents as well
as physical harm to the user.
8. If you are uncertain about any installation steps or have a problem related to the use of the product, please
consult a certified computer technician.
To Next Page
Loading...
