16
Installation ofMemory
Before installing the memory modules, please comply with the following conditions:
1. Please make sure that the memory used is supported by the mother-board. It is recommended that memory of
similar capacity, specifications and brand be used.
2. Before installing or removing memory modules, please make sure that the computer power is switched off to
prevent hardware damage.
3. Memory modules have a foolproof insertion design. A memory module can be installed in only one direction.
4. If you are unable to insert the module, please switch thedirection.1-4Installation of Memory
The motherboard has 2 dual inline memory module (DIMM) sockets. The BI OSwill automatically detect memory
type and size. To install the memory module, just push it vertically into the DIMM socket. The DIMM module can
only fit in one direction due to the notch. Memory size can vary between sockets.
1. The DIMM socket has a notch, so the
DIMM memory module can only fit in one
direction. Insert the DIMM memory
module vertically into the DIMM socket.
Then push it down.
Notch
16
To Next Page
Loading...
