Lenovo ThinkCentre A35 - Page 52

PCI 1 IRQ Assignment
1.Auto: Auto assign IRQ to PCI 1. (Default value)
2.3,4,5,7,9,10,11,12,14,15: Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1.
PCI 2 IRQ Assignment
1.Auto: Auto assign IRQ to PCI 2. (Default value)
2.3,4,5,7,9,10,11,12,14,15: Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2.
PCI 3 IRQ Assignment
1.Auto: Auto assign IRQ to PCI 3. (Default value)
2.3,4,5,7,9,10,11,12,14,15: Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3.
6-6 PC Health Status
Reset Case Open Status
1.Disabled: Don't reset case open status. (Default value)
2.Enabled: Clear case open status at next boot.
Case Opened
If the case is closed, Case Opened will show "No."
If the case is opened, Case Opened w
i
ll show "Yes."
If you want to reset Case Opened value, enable Reset Case Open Status and save the change
to CMOS, and then your computer will restart.
Current Voltage(V) V-core / VCC18/ +3.3V/+5V / +12V
Detect system's voltage status automatically.
Current System Temperature
Detect system temperature automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/SYSTEM FAN Speed (RPM)
51