Detect CPU/SYSTEM fan speed status automatically.
CPU Smart FAN Control
1.Enabled: Enable the CPU Smart FAN Control function. (Default Value)
a. When the CPU temperature is higher than 65 degrees Celsius, CPU fan
will operate at full speed.
b. When the CPU temperature is between 20 and 65 degrees Celsius, the
CPU fan speed will change depending on the actual CPU temperature.
c. When the CPU temperature is lower than 20 degrees Celsius, CPU fan
will stop spinning.
2.Disabled: Disable the CPU Smart FAN Control function.
6-7 MB Intelligent Tweaker (M.I.T.)
Incorrect using these features may cause your s
ystem corrupted. For power users only.
Linear Frequency Control
1.Disabled: Disable this function. (Default value)
2.Enable d: Enable this function.
CPU Clock (MHz)
This option is available only when Linear Frequency Control is enabled.
100~355 Select CPU Clock to 100MHz~355MHz.
If you use a Pentium 4 processor with 400MHz FSB, please set "CPU Clock" to 100MHz.
If you use a Pentium 4 processor with 533MHz FSB, please set "CPU Clock" to 133MHz.
If you use a Pentium 4 processor with 800MHz FSB, please set "CPU Clock" to 200MHz.
Incorrect using it may cause your system corrupted. For power users only!
DRAM Clock (MHz)
52
To Next Page
Loading...
