3. Locate the primary hard disk drive. See Figure 5 on page 13.
4. Disconnect the signal and power cables from the hard disk drive.
5. Press the blue release tab 1 down, slide the hard disk drive cage 2 back,
and pivot it outward.
6. Remove the hard disk drive cage from the chassis by simply sliding it
outward.
7. Pull on the blue handle 3 to release and remove the hard disk drive from
the drive cage.
8. Remove the hard disk drive from the blue plastic bracket by flexing the sides
of the bracket enough to slide it free from the hard disk drive.
Figure 18. Removing the primary hard disk drive
28 User Guide
To Next Page
Loading...
