Lenovo ThinkCentre M55p Deployment Guide

Using PowerQuest Drive Image based tools with Rescue and
Recovery
If the PowerQuest DeployCenter tool PQIMGCTR is installed in the following
location (X:\PQ), you can create and deploy an image with the Rescue and
Recovery program with the following scripts:
Minimum script files:
Table 4. X:\PQ\RRUSAVE.TXT
Script language Result
SELECT DRIVE 1 Selects the first hard disk drive.
SELECT PARTITION ALL
(Needed if you have a type 0x07 partition or
if you have multiple partitions in your
image.)
Selects all partitions.
Store with compression high Stores the image.
Table 5. X:\PQ\RRDEPLY.TXT
Script language Result
SELECT DRIVE 1 Selects the first hard disk drive.
DELETE ALL Deletes all partitions.
SELECT FREESPACE FIRST Selects first free space.
SELECT IMAGE ALL Selects all partitions in image.
RESTORE Restores the image.
Image creation:
Table 6. X:\PQ\PQIMGCTR / CMD=X:\PQ\RRUSAVE.TXT /MBI=1 / IMG=X:\IMAGE.PQI
Script language Result
SELECT DRIVE 1 Selects the first hard disk drive.
X:\PQ\PQIMGCTR Creates the image program.
/CMD=X:\PQ\RRUSAVE.TXT PowerQuest script file.
/MBI=1 Captures the Rescue and Recovery Boot
Manager.
/IMG=X:\IMAGE.PQI Creates the image file.
Image deployment:
Table 7. X:\PQ\PQIMGCTR / CMD=X:\PQ\RRDEPLY.TXT /MBI=1 / IMG=X:\IMAGE.PQI
Script language Result
SELECT DRIVE 1 Selects first hard disk drive.
X:\PQ\PQIMGCTR Creates the image program.
/CMD=X:\PQ\RRDEPLY.TXT Creates the PowerQuest script file.
/MBR=1 Restores the Rescue and Recovery Boot
Manager.
/IMG=X:\IMAGE.PQI Creates the image file.
12 Rescue and Recovery 4.3 Deployment Guide

Lenovo ThinkCentre M55p Specifications

General

Brand	Lenovo
Model	ThinkCentre M55p
Category	Desktop
Language	English