Mapping network drive
The following table provides the policy settings for the mapping network drive
function.
Table 37. \mnd\Rescue and Recovery
Policy Description
UNC UNC location for the mapped network drive (format \\server\share). Default: None.
User Use mapdrv.exe /view command to create an encrypted value for this field. Default:
None.
PWD Create default password for the mapped network drive. Default: none
Scheduler tasks
The following table provides the policy settings for the Scheduler tasks.
Table 38. \Scheduler\Tasks
Policy Description
DayOfMonth If the Scheduled Backup Mode is configured for Monthly, this allows selecting which
day of the month when scheduled backups should occur. Default: none.
DayOfWeek If the Scheduled Backup Mode is configured for Weekly, this allows selecting which
day of the week when scheduled backups should occur. Default: none.
Hour Select the hour when scheduled backups should occur. Valid values: 0–23. Default:
none.
Minute Select the minute when scheduled backups should occur. Valid values: 0–59. Default:
none.
Pre Command to run prior to the scheduled backup task. Include the full path to the file.
Default: none.
PreParameters The parameters that passes the command that is run prior to the scheduled backup
task. Default: none.
Post Command to run after the scheduled backup task. Include the full path to the file.
Default: none.
PostParameters The parameters that passes the command that is run after the scheduled backup task.
Default: none.
82 Rescue and Recovery 4.3 Deployment Guide
To Next Page
Loading...
Need help?
General