What to do if Lenovo Industrial PC has insufficient memory?
If your Lenovo Industrial PC has insufficient memory space: * Open Task Manager (right-click a blank area on the taskbar) and end tasks you are not using. * Consider installing additional memory modules.
How to fix Lenovo Industrial PC when it doesn't start?
If your Lenovo Industrial PC isn't starting, check these items: * Ensure the power cord is correctly connected to the rear of the computer and a working outlet. * If there's a secondary power switch on the rear, make sure it's on. * Verify the power indicator on the front of the computer is lit. * Confirm the computer voltage matches the outlet voltage. * Check that all storage drive signal and power cables are correctly connected. * Ensure the startup storage drive is the first in UEFI BIOS. * If your computer uses Optane memory, make sure it is installed and undamaged; use diagnostic tools to check it. In rare cases, if the storage drive with the operating system is corrupted, you might need to replace it.
How to fix Wi-Fi on Lenovo Industrial PC?
If the Wi-Fi feature on your Lenovo Industrial PC isn't working, try these steps: * Enable the Wi-Fi feature in UEFI BIOS. * Enable all Wi-Fi devices in Device Manager (right-click the Start button, select Device Manager, expand Network adapters, right-click each Wi-Fi device, and then click Enable device). * Enable the Wi-Fi feature in Windows Settings (Start menu ? Settings ? Network & Internet ? Wi-Fi). * Update or reinstall the Wi-Fi driver.
How to enable Bluetooth on Lenovo Industrial PC?
If the Bluetooth feature on your Lenovo Industrial PC isn't working, here are some things to try: * Enable the Bluetooth feature in UEFI BIOS. * Enable all Bluetooth devices in Device Manager (right-click the Start button, select Device Manager, expand Bluetooth, right-click each Bluetooth device, and then click Enable device). * Turn on the Bluetooth radio via Settings (Start menu ? Settings ? Devices ? Bluetooth & other devices. Turn on the Bluetooth switch to enable the Bluetooth feature.). * Update or reinstall the Bluetooth driver.
Why can't I hear audio on my Lenovo Industrial PC?
If you cannot hear audio on your Lenovo Industrial PC, check the following: * If using powered external speakers, ensure they are turned on and the power cable is connected to a functional outlet. * If your external speakers have a volume control, make sure the volume is not too low. * Check the speaker and volume settings by clicking the volume icon in the Windows notification area. Ensure the speaker is not muted and the volume is at an audible level. * If your computer has a front audio panel, ensure that the volume is not set too low.
How to free up disk space on Lenovo Industrial PC?
If the free storage drive space on your Lenovo Industrial PC is insufficient, try these steps: * Clean out your e-mail application's Inbox, Sent Items, and Deleted Items folders. * Run Disk Cleanup on your C drive (Open the Start menu. Click Windows System ? File Explorer ? This PC. Right-click your C drive and then click Properties. Check the amount of free space, and then click Disk Cleanup. Select the category you want to delete, and then click OK.). * Disable unnecessary Windows features or remove some unnecessary programs through Control Panel ? Programs and Features (Turn Windows features on or off, or Uninstall/Change or Uninstall programs).
What to do if Lenovo Industrial PC cannot connect to Ethernet LAN?
If your Lenovo Industrial PC cannot connect to an Ethernet LAN, consider the following: * Connect the cable from the Ethernet connector to the RJ45 connector of the hub. * Enable the Ethernet LAN feature in UEFI BIOS. * Enable the Ethernet LAN adapter in Control Panel under Network and Sharing Center ? Change adapter settings; right-click the Ethernet LAN adapter icon and click Enable. * Update or reinstall the Ethernet LAN driver. * Install all networking software that is necessary for your network environment. Check with your LAN administrator for the necessary networking software. * Set the same duplex for the switch port and the adapter. If you configured the adapter for full duplex, ensure that the switch port is also configured for full duplex. Setting a wrong duplex mod...
Declares compliance with Directive 2014/53/EU for ThinkCentre M90q radio equipment.
General| Memory | Up to 64GB DDR4 |
|---|---|
| Chipset | Intel Q470 |
| Processor | Up to 10th Gen Intel Core i9 |
| Storage | Up to 1TB SSD or 2TB HDD |
| Graphics | Integrated Intel UHD Graphics 630 |
| Operating System | Windows 10 Pro |
| Ports (Front) | 1 x USB-C 3.2 Gen 1, 1 x Headphone / mic combo |
| Ports (Rear) | 2 x DisplayPort, 1 x HDMI, 1 x Ethernet |
| Power Supply | 135W |
| Dimensions | 179 x 182.9 x 36.5 mm (7.05 x 7.2 x 1.44 inches) |
| Wireless | Wi-Fi 6, Bluetooth 5.1 |
To Next Page
