Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data. When handling the internal storage drive, observe the following guidelines:
• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for
frequent changes or replacement.
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged.
• Do not apply pressure to the internal storage drive.
• Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
2.5-inch primary storage drive, bracket, and cage
1. Remove the computer cover. See “Computer cover” on page 42.
2. Disconnect the signal cable and the power cable from the 2.5-inch primary storage drive.
3. Slide the 2.5-inch primary storage drive cage upward to release it from the 3.5-inch primary storage
drive cage.
4. Remove the 2.5-inch primary storage drive with the bracket from the cage.
48 M90t User Guide
To Next Page
Loading...
