Lenovo ThinkCentre M910t - Replacing the 2.5-Inch Storage Drive in the Storage Converter; Replacing the 2.5-Inch Storage Drive in the Tertiary Drive Bay

Replacing CRUs 34
Replacing the 2.5-inch storage drive in the storage converter
1
Remove the storage converter with the 2.5-inch storage drive. See Replacing the 3.5-inch storage
drive in the primary or secondary drive bay or Replacing the 3.5-inch storage drive in the front-access storage
enclosure.
2
Replace the 2.5-inch storage drive in the storage converter.
1 2
3
Reinstall the storage converter with the 2.5-inch storage drive. See Replacing the 3.5-inch storage
drive in the primary or secondary drive bay or Replacing the 3.5-inch storage drive in the front-access storage
enclosure.
Replacing the 2.5-inch storage drive in the tertiary drive bay
1
Remove the computer cover. For details, see Removing the computer cover.
2
Remove the front bezel. For details, see Replacing the front bezel.
3
Pivot the drive bay assembly outward. For details, see Pivoting the drive bay assembly inward and outward.
4
Disconnect the signal cable and the power cable from the 2.5-inch storage drive.
5
Replace the 2.5-inch storage drive in the tertiary drive bay.