Replacing FRUs 55
Replacing the thermal sensor
Attention
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
1
Remove the computer cover. For details, see Removing the computer cover.
2
Remove the front bezel. For details, see Replacing the front bezel.
3
Pivot the drive bay assembly outward. For details, see Pivoting the drive bay assembly inward and outward.
4
Disconnect the thermal sensor cable from the system board.
5
Replace the thermal sensor.
1 2
6
Connect the new thermal sensor cable to the system board.
7
Reinstall the removed parts. To complete the replacement, see Completing the parts replacement.
To Next Page
Loading...
