Replacing the optical drive
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove any media from the drives and turn off all connected devices and the computer. Disconnect all
power cords from electrical outlets and disconnect all cables from the computer.
2. Remove the computer cover. See “Removing the computer cover” on page 17.
3. Remove the front bezel. See “Replacing the front bezel” on page 18.
4. Disconnect the signal cable and the power cable from the optical drive.
5. Replace the optical drive.
Slim optical drive
Figure 19. Removing the optical drive
Figure 20. Removing the optical drive bracket
22 M920t User Guide and Hardware Maintenance Manual
To Next Page
Loading...
