EasyManua.ls Logo

Lenovo ThinkCentre M920t - Page 8

Lenovo ThinkCentre M920t
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
connect a cable between the audio line-in connector of the device and the audio line-out connector of the
computer.
Note: If your computer has both an audio line-out connector and a headset or headphone connector, always
use the headset connector or headphone connector for earphones, headphones, or a headset. The
headphone connector does not support headset microphones.
2 VGA-out connector
Used to send video signals from the computer to another video device, such as a monitor.
3 DisplayPort 1.2 out connector
Used to send audio and video signals from the computer to another audio or video device, such as a high-
performance monitor.
4 USB 3.1 Gen 1 connector
Used to connect a USB-compatible device. For optimal data transfer, connect a USB 3.1 Gen 1 device to a
USB 3.1 Gen 2 or USB 3.1 Gen 1 connector instead of a USB 2.0 connector. This connector supports the
smart power on feature that enables you to turn on the computer or wake it up from S4 hibernation mode by
pressing Alt+P on the keyboard. You can enable or disable the smart power on feature from the Setup Utility
program. For detailed information, see the Important Product Information Guide.
5 USB 3.1 Gen 1 connectors
Used to connect a USB-compatible device. For optimal data transfer, connect a USB 3.1 Gen 1 device to a
USB 3.1 Gen 2 or USB 3.1 Gen 1 connector instead of a USB 2.0 connector.
6 Power cord connector
Used to connect the power cord to your computer for power supply.
7 Serial connector
Used to connect an external modem, a serial printer, or other devices that use a serial connector.
8 PS/2 mouse connector
Used to connect a mouse, a trackball, or other pointing devices that use a PS/2 mouse connector.
9 PS/2 keyboard connector
Used to connect a keyboard that uses a Personal System/2 (PS/2) keyboard connector.
10 Ethernet connector
Used to connect an Ethernet cable for network access.
11 Rear Wi-Fi antenna cover
Used to protect the rear Wi-Fi antenna that is optional.
12 Serial connector
Used to connect an external modem, a serial printer, or other devices that use a serial connector.
4
M920t User Guide and Hardware Maintenance Manual

Related product manuals