Description: During the boot process, the computer might not detect the external monitors that need more
time to get ready. Select how long you want to extend the boot process.
Power
• Intel (R) SpeedStep technology
Values: Disabled, Enabled
Description: Select the mode of Intel SpeedStep
®
technology at runtime.
– Mode for AC
Values: Maximum Performance, Battery Optimized
Description: Maximum Performance: Always the highest speed
– Mode for Battery
Values: Maximum Performance, Battery Optimized
Description: Battery Optimized: Always the lowest speed
• CPU Power Management
Values: Disabled, Enabled
Description: Enable or disable the power-saving feature that stops the microprocessor clock automatically
when there are no system activities. Normally, it is not necessary to change the setting.
• Power On with AC Attach
Values: Disabled, Enabled
Description: Enable or disable a feature that turns on the computer when the ac power adapter is
attached.
• Disable Built-in Battery
Values: Yes, No
Description: Temporary disable battery for servicing the system. After selecting this item, the system will
be automatically powered off, then ready to be serviced.
Note: The battery will be automatically enabled when the ac power adapter is reconnected.
Beep and Alarm
• Password Beep
Values: Disabled, Enabled
Description: Enable or disable a beep when the computer is waiting for a power-on, hard disk, or
supervisor password. Different beeps remind you that the password you entered is right or wrong.
• Keyboard Beep
Values: Enabled, Disabled
Description: Enable or disable a beep when unmanageable key combinations are pressed.
Storage
Note: This menu is displayed when Intel Optane memory is installed.
• Controller Mode
Values: AHCI mode. RST mode,
Description: If your computer has an Intel Optane memory installed, select RST mode so that you can
enable the Intel Optane memory in the Windows operating system.
Chapter 6. Advanced configuration 49
To Next Page
Loading...
