22
Section 5 – Installing SATA Drives in
P3 Ultra
The P3 Ultra supports one 2.5” SATA drive. Adding a SATA drive into a P3
Ultra that does not already have one will require additional parts. The SATA
drive will also prevent the use of PCIe x4, located on the side of the
motherboard opposite the CPU. The installation requires a 2.5” Drive Bracket
(FRU 5M11H28482) and SATA ribbon cable (FRU 5C10U58607).
Figure 13 - P3 Ultra Motherboard with SATA Port Callout
Figure 14 - P3 Ultra Chassis with SATA Bracket Installed
To Next Page
Loading...
