(1) Host interface card (HIC)
(2) Thumbscrews
5.
Place the HIC on a static-free surface.
3.2.5. Step 5: Install battery (duplex)
Install the battery into the replacement controller canister. You can install the battery that you
removed from the original controller canister or install a new battery that you ordered.
Steps
1.
Turn the replacement controller canister over, so that the removable cover faces up.
2.
Press down on the cover button, and slide the cover off.
3.
Orient the controller canister so that the slot for the battery faces toward you.
4.
Insert the battery into the controller canister at a slight downward angle.
You must insert the metal flange at the front of the battery into the slot on the bottom of the
controller canister, and slide the top of the battery beneath the small alignment pin on the left
side of the canister.
5.
Move the battery latch up to secure the battery.
26
To Next Page
Loading...
