Lenovo ThinkSystem SD530 V3 - Node Mechanical Specifications

Minimal configuration for debugging
Minimal configuration for debugging
• The following minimal configuration is required for the node to start:
– One processor in socket 1
– One memory module in DIMM slot 4
– One power supply in PSU slot 1
– One boot drive, M.2 or E3.S drive, and RAID adapter if configured (If OS is needed by debugging)
– Four system fans
Operating systems
Operating systems
Supported and certified operating systems:
• Microsoft Windows Server
• VMware ESXi
• Red Hat Enterprise Linux
• SUSE Linux Enterprise Server
References:
• Complete list of available operating systems:
https://lenovopress.lenovo.com/osig.
• OS deployment instructions, see
“Deploy the operating system” on page 61.
Node mechanical specifications
Summary of the mechanical specifications of the ThinkSystem SD530 V3 node. Depending on the model,
some features might not be available, or some specifications might not apply.
Dimension
ThinkSystem SD530 V3 node
• Height: 40.55 mm (1.60 inches)
• Width: 221.4 mm (8.72 inches)
• Depth: 907 mm (35.71 inches) (including E3.S drives)
Weight
Maximum:
• 7.6 kg (16.76 lbs)
10 ThinkSystem SD530 V3 System Configuration Guide