Lenovo ThinkSystem SD530 V3 - Installing Intel on Demand to Processor

The output shows PPIN information. For example:
Machine Type: 7D75
Serail Number: 7D75012345
FoD PPIN result:
======================================
| Socket ID | PPIN |
| Processor 1 | 1234567890xxxyyy |
| Processor 2 | 9876543210zzzyyy |
======================================
Installing Intel On Demand to processor
Install Intel On Demand features to the processor with the Activation Key downloaded from the
https://
fod.lenovo.com/lkms
via XCC Web GUI, XCC REST API or LXCE OneCLI.
Use XCC Web GUI to install Intel On Demand
1. Open XCC Web GUI, go to BMC Configuration ➙ License ➙ On Demand Capabilities for Intel CPU
➙ Upgrade License ➙ Browse ➙ Import to upload the Activation Key
Figure 22. Uploading Activation Key via XCC Web GUI
2. If the installation is successful, the Web GUI will show a pop-up window with the message “License key
upgraded successfully. The features will be activated on the processor after system power cycle”.
Otherwise, see
“Enable Intel
®
On Demand Troubleshooting” on page 72
.
Use XCC REST API to install Intel On Demand
1. Use the POST method with the following Request URL:
POST https://bmc_ip/redfish/v1/LicenseService/Licenses
2. Transfer Activation Key to base64 string at first and fill it into the LicenseString field as POST data.
{
"LicenseString": ""
}
3. If the installation is successful, XCC REST API show the message “License key upgraded successfully.
The features will be activated on the processor after system power cycle”.
Chapter 5. System configuration 67