Figure 62. Removal of a memory module
After this task is completed
1. Install a replacement unit or filler (see
“Install a memory module” on page 107) .
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a memory module
Follow instructions in this section to install a memory module.
About this task
See
“Memory module installation rules and order” on page 45 for detailed information about memory
configuration and setup.
To avoid potential danger, make sure to read and follow the safety information.
Attention:
• Read
“Installation Guidelines” on page 41 and “Safety inspection checklist” on page 42 to make sure that
you work safely.
Chapter 5. Hardware replacement procedures 107
To Next Page
Loading...
