EasyManua.ls Logo

Lenovo ThinkSystem SD530 V3 - Page 19

Lenovo ThinkSystem SD530 V3
256 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Integrated functions and I/O connectors
Integrated functions
Lenovo XClarity Controller (XCC), which provides service processor control and monitoring functions, video
controller, and remote keyboard, video, mouse, and remote drive capabilities.
One XCC system management port to connect to a systems-management network. This RJ-45 connector is
dedicated to the Lenovo XClarity Controller functions and runs at 10/100/1000 Mbps speed.
Front connectors:
One serial port
One USB 3.2 Gen 1 connector
One VGA connector
One external diagnostics connector
Rear connectors:
A group of two or four Ethernet connectors on OCP Ethernet adapter
One Mini DisplayPort connector
One XCC system management port
One USB 3.2 Gen 1 connector
One USB 2.0 connector with Lenovo XClarity Controller (XCC) system management
Note: The maximum video resolution is 1920 x 1200 at 60 Hz.
Network
Network
Two or four connectors on the OCP 3.0 module
RAID adapter
RAID adapter
The ThinkSystem RAID provides software RAID support for M.2 drives:
Intel VROC standard: requires an activation key and supports RAID level 0 and 1
Intel VROC Premium: requires an activation key and supports RAID level 0 and 1
Intel VROC Boot (for 5th Gen processors): requires an activation key and supports RAID level 1 only
Onboard SATA ports with software RAID support (Intel VROC SATA RAID, supporting RAID level 0 and 1)
The ThinkSystem RAID provides software RAID support for E3.S drives:
Intel VROC standard: requires an activation key and supports RAID level 0 and 1
For more information about the supported RAID/HBA adapters, see
Lenovo ThinkSystem RAID Adapter and HBA
Reference
.
System fan
System fan
Four 4056 fans (40 x 40 x 56 mm)
Chapter 1. Introduction 9

Table of Contents

Other manuals for Lenovo ThinkSystem SD530 V3

Related product manuals