Figure 106. Node installation
d. Install the five screws and fasten the two thumb screws to secure the shipping bracket.
Figure 107. Node installation
After you install a node, complete the following steps:
1. Install the enclosure into rack if necessary.
2. Reconnect power cords and all external cables.
3. Turn on the server (see
“Power on the server” on page 16).
PCIe riser assembly replacement
Use this procedure to remove or install the PCIe riser assembly.
Remove the PCIe riser assembly
Use this information to remove the PCIe riser assembly .
To avoid possible danger, read and follow the following safety statement.
• S012
Chapter 3. Hardware replacement procedures 103
To Next Page
Loading...
