Table 34. Power adapters
1 ThinkEdge 240W 230V/115V External Power Supply 2 ThinkEdge 240W 230V/115V External Power Supply v2
Note: To tell the difference between the power adapters, you can check the physical size, the label and the
connector position of the power connectors.
Figure 122. Power adapters
To install a power adapter, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
DkEpH4SzvKZck4f6rVRzUE
.
Step 1. Install the power adapter.
• If you are installing a power adapter while a node is installed in an enclosure, complete the
following steps.
1. Insert the power adapter into the cage.
– E1 Enclosure (1U 2-node)
Figure 123. Power adapter installation
– E2 Enclosure (2U 2-node)
116 ThinkSystem SE350 and ThinkSystem SE350 Enclosures Maintenance Manual
To Next Page
Loading...
